achievements

学術論文Original Papers

19 27
T. Nakamura, H. Tabuchi, T. Hirai, S. Fujii, Y. Nakamura
“Effects of silane coupling agent hydrophobicity and loading method on water absorption and mechanical strength of silica particle-filled epoxy resin”
Journal of Applied Polymer Science (2019) accepted
26
岡本泰直,田上隼也,名和愛利香,山本 大吾,藤井秀司,牧泰輔,前一廣,塩井章久
"リキッドマーブルを用いた微小空間におけるBZ反応の挙動"
粉体工学会誌 (2019) in press.
25
C. A. Thomas, M. Kasahara, Y. Asaumi, B. T. Lobel, S. Fujii, P. M. Ireland, G. B. Webber, E. J. Wanless
"Influence of particle size on extraction from a charged bed - toward liquid marble formation"
Soft Matter 15(38), 7529-7736 (2019) DOI: 10.1039/c9sm01467e
[Inside front cover]
24
S.-Y. Tsai, S. Kuretani, K. Manabe, T. Terao, T. Komamura, Y. Agata, N. Ohta, S. Fujii, Y. Nakamura, C.-L. Wang, T. Hayakawa, T. Hirai
"Preparation of polyhedral oligomeric silsesquioxane (POSS)-containing block copolymer with well-controlled stereoregularity"
Journal of Polymer Science, Part A: Polymer Chemistry (2019) accepted
[Journal cover] 
23
S. Hiranphinyophat, Y. Asaumi, S. Fujii, Y. Iwasaki
"Surface grafting polyphosphoesters on cellulose nanocrystals to improve the emulsification efficacy"
Langmuir 35, 11443-11451 (2019) DOI: 10.1021/acs.langmuir.9b01584
[Journal cover] 
22
中村充,平井智康,藤井秀司,中村吉伸
"エポキシ樹脂の吸水率におよぼすシリカ粒子とシランカップリング剤添加の影響"
ネットワークポリマー,40(4),170-176 (2019)
21
中村吉伸,柏原佑亮,平井智康,藤井秀司 
"パルスNMRによる粒子充てん複合材料の界面と粘着剤の構造解析" 
日本接着学会誌 55(7), 271-277 (2019)
20
P. M. Ireland, C. A. Thomas, B. T. Lobel, G. B. Webber, S. Fujii, E. J. Wanless 
“Electrostatic formation of liquid marbles – Statistical model” 
IOP Conference Series (2019) accepted
19
S. M. Salehabad, S. Azizian, S. Fujii
“Shape-designable liquid marbles stabilized by gel layer” 
Langmuir 35, 8950-8960 (2019) https://doi.org/10.1021/acs.langmuir.9b01473
18

H. Inoue, N. Shimogama, S. Mukai, S. Higashimoto, T. Hirai, Y. Nakamura, S. Fujii

“Poly(3,4-ethylenedioxythiophene) grains synthesized by solvent-free chemical oxidative 

polymerization”

Chemistry Letters 48(8), 968-970 (2019) https://doi.org/10.1246/cl.190350

17

柏原佑亮,岡田駿,浦濱圭彬,日笠茂樹,平井智康,藤井秀司,中村吉伸

“平衡膨潤法,力学特性,パルスNMRによる 加硫ゴムと粘着剤の架橋構造の解析”

日本ゴム協会誌,92(5), 174-181 (2019).

16
H. Hanochi, N. T. Lien, S. Yusa, Y. Nakamura, S. Fujii
“Colloidal stabilizer-assisted polymerization-induced precipitation method toward colloidally stable polyacid particles”
Langmuir (2019) DOI: 10.1021/acs.langmuir.9b00505
[Highlighted in接着剤新聞]
15
S. Kozuka, T. Banno, S. Fujii, Y. Nakamura, S. Yusa
“Disruption of liquid marbles induced by host-guest interaction”
Chemistry Letters (2019) https://doi.org/10.1246/cl.190232
14

M. Kasahara, S. Akimoto, T. Hariyama, Y. Takaku, S. Yusa, S. Okada, K. Nakajima, T. Hirai, H. Mayama, S. Okada, S. Deguchi, Y. Nakamura, S. Fujii

“Liquid marbles in nature: Craft of aphids for survival”

Langmuir 35, 6169-6178 (2019) DOI: 10.1021/acs.langmuir.9b00771

[Highlighted in 接着剤新聞]

13

Y. Tamai, A. Kawamura, M. Yamamoto, T. Taniguchi, K. Kishikawa, S. Fujii, N. Teramoto, H. Ishii, D. Nagao, M. Kohri

“Ellipsoidal artificial melanin particles: building blocks for biomimetic structural coloration”

Langmuir 35(16), 5574-5580 (2019) DOI: 10.1021/acs.langmuir.9b00400

[Most Read Articles, the journal’s Top 20 most downloaded articles for the previous 30 days: 7/5/2019]

12
H. Hanochi, Y. Nakamura, S. Fujii
“Synthesis of near-monodispersed polyacid particles containing phosphate groups by free radical dispersion polymerization”
Chemistry Letters (2019) https://doi.org/10.1246/cl.190196
11
M. Ohshio, K. Iimura, S. Fujii, Y. Nakamura, S. Yusa
“Oxidation-responsive liquid marbles”
Chemistry Letters (2019) doi:10.1246/cl.190148
10
S. Okada, Y. Kashihara, T. Hirai, S. Fujii, Y. Nakamura, Y. Urahama, K. Nakajima, M. Ito, X. Liang
“Adhesion properties of polyacrylic block copolymer pressure-sensitive adhesives and analysis by pulse NMR and AFM force curve”
Journal of Applied Polymer Science (2019) DOI: 10.1002/app.47791
9

S. Niyomsin, T. Hirai, At. Takahara, S. Chirachanchai

"Incorporation of Benzoxazine Pendants in Polymer Chains: A Simple Approach to Add-Up Multi-Responsive Functions"

Macromolecular Chemistry and Physics. (2019). DOI: 10.1002/macp.201800526 

8
岡田 駿, 柏原佑亮, 竹﨑 愛, 浦濱圭彬, 平井智康, 藤井秀司, 中村吉伸 
"粘着テープのピール強度におよぼすステンレス鋼製被着体の洗浄法の影響" 
日本接着学会誌,55(3), 88-96 (2019).
7

N. Shimogama, M. Uda, K. Oyama, H. Hanochi, T. Hirai, Y. Nakamura, S. Fujii

“Hydrophobic poly(3,4-ethylenedioxythiophene) particles synthesized by aqueous oxidative coupling polymerization and their use as near-infrared-responsive liquid marble stabilizer”

Polymer Journal (2019)  https://doi.org/10.1038/s41428-019-0189-0

6

Y. Kawata, C. A. Thomas, Y. Asaumi, H. Hanochi, P. M. Ireland, S. Fujii, Y. Nakamura, E. J. Wanless, G. B. Webber, S. Yusa

“Electrostatic formation of liquid marbles using thermos-responsive polymer-coated particles”

Chemistry Letters (2019) 48, 578–581 (2019) doi:10.1246/cl.190105

5

M. Takeuchi, H. Kawashima, H. Imai, S. Fujii, Y. Oaki

“Quantitative detection of NIR using organic layered composites”

Journal of Materials Chemistry C (2019) DOI: 10.1039/c9tc00380k

4

H. Kawashima, A. Shioi, R. J. Archer, S. J. Ebbens, Y. Nakamura, S. Fujii

“Light-driven locomotion of centimeter-sized object on air-water interface: Effect of fluid resistance”

RSC Advances 9, 8333-8339 (2019).

3

F. Geyer, Y. Asaumi, D. Vollmer, H.-J. Butt, Y. Nakamura, S. Fujii

“Polyhedral liquid marbles”

Advanced Functional Materials 29(25), 1808826 (2019) DOI: 10.1002/adfm.201808826

[Front cover]

[Highlighted in NatureNewScientist, Publication of Impact (Max Planck Institute for Polymer Research)]

[NHKおはよう関西, NHKニュース全国版, 日刊工業新聞]

2

S. Azizian, S. Fujii, M. Kasahara, H.-J. Butt, M. Kappl

“Effect of particle morphology on mechanical properties of liquid marble”

Advanced Powder Technology, 30, 330-335 (2019) doi.org/10.1016/j.apt.2018.11.010

1

H. Inoue, T. Hirai, H. Hanochi, K. Oyama, H. Mayama, Y. Nakamura, S. Fujii

"Poly(3-hexylthiophene) grains synthesized by solvent-free oxidative coupling polymerization and their use as light-responsive liquid marble stabilizer"

Macromolecules, 52(2), 708-717 (2019) DOI: 10.1021/acs.macromol.8b02426

[Highlighted in 朝日新聞, 朝日新聞デジタル, 接着剤新聞,電子デバイス産業新聞]

     
18 15

M. Mukai, Y. Higaki, T. Hirai, A. Takahara

"Separation of Endo-cyclic 2-Methacryloxyloxyethyl Choline Phosphate by Anion Exchange Approach"

Chemistry Letters, 47, 1509-1511 (2018). 

14

K. Kamitani, A. Hamada, K. Yokomachi, K. Ninomiya, K. Uno, M. Mukai, Y. Konishi, N. Ohta, M. Nishibori, T. Hirai, A. Takahara

"Depth-Resolved Characterization of Perylenediimide Side-Chain Polymer Thin Film Structure Using Grazing-Incidence Wide-Angle X-ray Diffraction with Tender X-rays"

Langmuir, 34, 8516-8521 (2018).

13

Y. K. Maurya, K. Noda, K. Yamasumi, S. Mori, T. Uchiyama, K. Kamitani, T. Hirai, K. Ninomiya, M. Nishibori, Y. Hori, Y. Shiota, K. Yoshizawa, M. Ishida, H. Furuta

"Ground-State Copper(III) Stabilized by N-Confused/N-Linked Corroles: Synthesis, Characterization, and Redox Reactivity"

Journal of American Chemical Society, 140, 6883-6892 (2018).

12

Y. Kashihara, S. Okada, Y. Urahama, S. Hikasa, S. Makuta, K. Fujiwara, S. Fujii, Y. Nakamura

“Effects of the degree of crosslinking and test rate on the tensile properties of a crosslinked polyacrylic pressure-sensitive adhesive and vulcanized rubber”

Journal of Applied Polymer Science (2018) doi.org/10.1002/app.47272 (First published: 11 November 2018)

11

岡田駿, 堤亮太, 前田稔充, 藤井秀司,中村吉伸,原田義之, 浦濱桂彬

"架橋アクリル系粘着剤の傾斜式ボールタック試験"

日本接着学会誌 54(8), 287-293 (2018).

10

T. Kato, M. Sato, H. Shimamoto, K. Uno, K. Yokomachi, Y. Konishi, K. Kamitani, M. Nishibori, N. Ohta, R. Ishige, K. L. White, N. Otozawa, T. Hirai, A. Takahara

"Preparation of High-Density Polymer Brush with Multi-Helical Structure"

Langmuir, 34, 3283-3288 (2018). 

9

M. Sato, T. Kato, H. Shimamoto, K. Kamitani, N. Ohta, T. Hirai, A. Takahara

"Design of High-Density Helical Polymer Brush on Silica Nanoparticles for the Size Recognition of Fullerene Molecules"

ACS Macro Letters, 7, 148-152 (2018).

8

堤亮太, 佐々木凱央, 橋口千聖, 岡田駿, 藤井秀司,中村吉伸,藤原和子, 日笠茂樹

"アミノ基およびメルカプロ基含有シランカップリング剤混合系で表面処理した炭酸カルシウム粒子表面上の処理層の構造解析"

日本接着学会誌 54(4), 133-140 (2018)

7

P. M. Ireland, K. Kido, G. B. Webber, S. Fujii, E. J. Wanless

“pH-Responsive particle-liquid aggregates – Electrostatic formation kinetics”

Frontiers in Chemistry 6, 215 (2018)

6

H. Kawashima, R. Okatani, H. Mayama, Y. Nakamura, S. Fujii

“Synthesis of hydrophobic polyanilines as a light-responsive liquid marble stabilizer”

Polymer 148, 217-227 (2018)

5

M. Ito, K. Takano, H. Hanochi, S. Yusa, Y. Nakamura, S. Fujii

“pH-Responsive aqueous bubbles stabilized with polymer particles carrying poly(4-vinylpyridine) colloidal stabilizer”

Frontiers in Chemistry (2018) DOI: 10.3389/fchem.2018.00269

4

S. Fujii, Y. Yokoyama, S. Nakayama, M. Ito, S. Yusa, Y. Nakamura

“Gas bubbles stabilized by Janus particles with varying hydrophilic-hydrophobic surface characteristics”

Langmuir 34(3), 933-942 (2018) DOI: 10.1021/acs.langmuir.7b02670

[Special Issue: Early Career Authors in Fundamental Colloid and Interface Science]

[Highlights from the Langmuir Editorial Advisory Board]

3

R. Tsutsumi, T. Sasaki, C. Hashiguchi, R. Yamazaki, S. Fujii, Y. Nakamura, K. Fujiwara, S. Hikasa

“Surface Treatment of CaCO3 with a Mixture of Amino- and Mercapto-Functional Silane coupling Agents and Tensile Properties of the Rubber Composites”

Composite Interfaces (2018) 25(8), 743-760 (2018)

2

K. Kido, P. M. Ireland, T. Sekido, E. J. Wanless, G. B. Webber, Y. Nakamura, S. Fujii

“Formation of liquid marbles using pH-responsive particles: Rolling vs electrostatic methods”

Langmuir  34(17), 4970-4979 (2018)

1

C. Thomas, K. Kido, H. Kawashima, S. Fujii, P. Ireland, G. Webber, E. J. Wanless

“Electrostatic Formation of Polymer Particle Stabilised Liquid Marbles and Metastable Droplets - Effect of Latex Shell Conductivity”

Journal of Colloid and Interface Science (2018) DOI: 10.1016/j.jcis.2018.04.044

     
17 13

A. Tateyama, A. Kato, H. Miyaji, E. Nishida, Y. Iwasaki, S. Fujii, K. Kawamoto, T. Furihata, T. Sugaya

“Bone inductive effect of the emulsion based α-tricalcium phosphate microparticles containing simvastatin”

Nano Biomedicine 9(2), 69-76 (2017)

12

Y. Azakami, M. Kappl, S. Fujii, S. Yusa, C. McNamee

“Effect of the addition of a cross-linker and the water pH on the physical properties of films of pH-responsive polymer particles at air/water interfaces”

ACS Omega 2(11), 7837-7848 (2017) DOI: 10.1021/acsomega.7b01241

11

野田昌代,高倉和希, 岡田駿, 藤井秀司,中村吉伸,浦濱圭彬

"アクリル系粘着剤の力学特性におよぼす架橋度と試験速度の影響"

日本接着学会誌 53(7), 268-275 (2017)

10

H. Kawashima, M. Paven, H. Mayama, H.-J. Butt, Y. Nakamura, S. Fujii

“Transfer of materials from water to solid surfaces by using liquid marbles”

ACS Applied Materials & Interfaces 9(38), 33351-33359 (2017) DOI: 10.1021/acsami.7b11375

[日本経済新聞 電子版 2017/11/21 6:00]

9

A. Bouleghlimat, M. A. Othman, S. Matsuzawa, Y. Nakamura, S. Fujii, N. J. Buurma

“The effect of halides on the palladium nanoparticle catalyzed oxidative homocoupling reaction of aryl boronic acids in aqueous solutions; enhanced catalytic activity at the expense of catalyst recovery”

Catalysts 7(9), 280 (2017) doi:10.3390/catal7090280

8

T. Sekido, M. Kappl, H.-J. Butt, S. Yusa, Y. Nakamura, S. Fujii

“Effects of pH on structure and mechanical properties of dried pH-responsive latex particles”

Soft Matter (2017) DOI: 10.1039/C7SM01625E

7

D. Yamamoto, R. Yamamoto, A. Shioi, S. Fujii, K. Yoshikawa

“Periodic Motions of Solid particles with Various Morphology under a DC Electrostatic Field”

Chemistry Letters (2017)  46, 1470-1472 (2017) doi.org/10.1246/cl.170622

6

K. Kido, T. Sumoto, Y. Yasui, Y. Nakamura, S. Fujii

“Droplet size and morphology analyses of dry liquid”

Advanced Powder Technology  28, 1977-1981 (2017) DOI: 10.1016/j.apt.2017.04.027

5

H. Kawashima, H. Mayama, Y. Nakamura, S. Fujii

“Hydrophobic polypyrrole synthesized by aqueous chemical oxidative polymerization and its use as a light-responsive liquid marble stabilizer”

Polymer Chemistry 8, 2609-2618 (2017)

[Back cover]

4

K. Nakai, K. Ishihara, M. Kappl, S. Fujii, Y. Nakamura, S. Yusa

“Polyion complex vesicles with solvated phosphobetaine shells formed from oppositely charged diblock copolymers”

Polymers 9, 49 (2017)

[Front cover]

3

T. Sekido, S. Wooh, R. Fuchs, M. Kappl, Y. Nakamura, H.-J. Butt, S. Fujii

“Controlling the structure of supraballs by pH-responsive particle assembly”

Langmuir 33, 1995-2002 (2017) DOI: 10.1021/acs.langmuir.6b04648

[Most Read Articles]

[Highlights from the Langmuir Editorial Advisory Board]

 

2

C. McNamee, S. Fujii, S. Yusa, M. Kappl
“The physical properties of mixed Langmuir monolayers of polystyrene particles with poly[2-(dimethylamino)ethylmethacrylate] hairs and a poly(2-hydroxyethyl methacrylate) polymer at an air/water interface”
Soft Matter 13, 1583-1593 (2017) DOI: 10.1039/C6SM02529C

1

S. Fujii, E. Mouri, K. Akiyama, S. Nakayama, K. Uda, Y. Nakamura, H. Matsuoka
“pH-Sensitive adsorption behavior of polymer particles at the air-water interface”
Langmuir 33, 1451-1459 (2017) DOI: 10.1021/acs.langmuir.6b03895

     
16 13

Y. Nakamura, T. Matsumoto, K. Miyazaki, M. Noda, K. Takakura, R. Tsutsumi, S. Fujii, K. Fujiwara, S. Hikasa, M. Sasaki

“Effect of the degree of crosslinking on the interfacial layer structure of poly(vinyl chloride) dispersed with crosslinked poly(n-butyl methacrylate) particles”

Composite Interfaces (2016) in press DOI: 10.1080/09276440.2016.1270644

12

P. M. Ireland, M. Noda, E.D. Jarrett, S. Fujii, Y. Nakamura, E.J. Wanless, G.B. Webber

“Electrostatic formation of liquid marbles - Influence of drop and particle size”

Powder Technology 303, 55-58 (2016) DOI: 10.1016/j.powtec.2016.08.036

11

嘉流 望,野田昌代,藤井秀司,中村吉伸,浦濱圭彬

"プローブタック試験時の濡れ挙動におよぼす粘着剤の分子構造の影響"

日本接着学会誌,52巻3号,59-69 (2016)

10

E. Sato, M. Yuri, S. Fujii, T. Nishiyama, Y. Nakamura, H. Horibe

“Liquid Marble Containing Degradable Polyperoxides for Adhesion Force-Changeable Pressure-Sensitive Adhesives”

RSC Adv. 6, 56475-56481 (2016) DOI: 10.1039/C6RA10677C

9

N. Nishizawa, S. Fujii, T. Kakuta, K. Tanaka, S. Yusa, Y. Chujo, Y. Nakamura

“Polystyrene-polyhedral oligomeric silsesquioxane core-shell element-block polymer particles fabricated via heterocoagulation method”

Chemistry Letters 45(10), 1168-1170 (2016) DOI: 10.1246/cl.160545

8

S. Yusa, S. Ohno, H. Imoto, Y. Nakao, K. Naka, Y. Nakamura, S. Fujii

“Synthesis of silsesquioxane-based element-block amphiphiles and their self-assembly in water”

RSC Advances 6, 73006-73012 (2016) DOI: 10.1039/c6ra13995g 

7

S. Nakayama, S. Hamasaki, K. Ueno, M. Mochizuki, S. Yusa, Y. Nakamura, S. Fujii

“Foams Stabilized with Solid Particles Carrying Stimuli-responsive Polymer Hairs”

Soft Matter 12, 4794-4804 (2016) DOI: 10.1039/C6SM00425C

6

N. Karyu, M. Noda, S. Fujii, Y. Nakamura, Y. Urahama

“Effect of adhesive thickness on the wettability and deformability of polyacrylic pressure-sensitive adhesives during probe tack test”

Journal of Applied Polymer Science (2016) DOI: 10.1002/app.43639

5

K. Fukuoka, A. Tomikawa, Y. Nakamura, S. Fujii

“Aqueous foams stabilized with several tens of micrometer-sized polymer particles: Effects of surface hydrophilic-hydrophobic balance on foamability and foam stability”

Chem. Lett. 45(6), 667-669 (2016) DOI:10.1246/cl.160182

4

S. Ohno, Y. Tsuda, K. Nakai, S. Fujii, Y. Nakamura, S. Yusa

“pH-Responsive Liquid Marbles Prepared by Fluorinated Fatty Acid”

Chem. Lett. (2016) DOI:10.1246/cl.160056

3

N. Nishizawa, A. Kawamura, M. Kohri, Y. Nakamura, S. Fujii

“Polydopamine particle as a particulate emulsifier”

Polymers 8, 62 (2016) DOI: doi:10.3390/polym8030062

2

M. Paven, H. Mayama, T. Sekido, H.-J. Butt, Y. Nakamura, S. Fujii

“Light-driven delivery and release of materials using liquid marbles”

Advanced Functional Materials 26, 3199–3206 (2016) DOI: 10.1002/adfm.201600034
[Back cover]
[News & Views, Nature Photonics, 10, 293 (2016)]
[2 out of the 10 hottest papers printed in Adv. Funct. Mater. (April, 2016)]
[Highlighted in Max-Planck Institute for Polymer Research Highlight 2016, Welt der Physik, NewScientist, DailyMail, Gizmodo, Gizmodo India, 日刊工業新聞]

1

S. Fujii, S. Sawada, S. Nakayama, M. Kappl, K. Ueno, K. Shitajima, H.-J. Butt, Y. Nakamura

“Pressure-Sensitive Adhesive Powder”

Materials Horizons 3, 47-52 (2016) DOI: 10.1039/c5mh00203f
[Inside front cover]
[Highlighted in Chemistry World, NewScientist, TECH TIMES, Helsingin Sanomat, Digital Journal, Gizmodo, techniek en wetenschap, Physicstoday, Adhesivies & Sealants Industry, DailyMe, Notey, Co.Design, Ad Pub, Hackaday, CrazyChucks.com News, Интернет издание Багнет, 中国科学报, Yahooニュース, 毎日新聞, 毎日放送, 接着剤新聞, 化学工業日報]

     
15 21

R. Yamazaki, N. Karyu, M. Noda, S. Fujii and Y. Nakamura

“Quantitative Measurement of Physisorbed Silane on Silica Particle Surface Treated with Silane Coupling Agents by Thermogravimetric Analysis”

Journal of Applied Polymer Science (2015) in press

20

E. Sato, M. Yuri, S. Fujii, T. Nishiyama, Y. Nakamura, H. Horibe

“Liquid marbles as a micro-reactor for efficient radical alternating copolymerization of diene monomer and oxygen”

Chem. Commun. 51, 17241-17244 (2015)

19

S. Nakayama, S. Yusa, Y. Nakamura, S. Fujii

“Aqueous Foams Stabilized by Temperature-Sensitive Hairy Polymer Particles”

Soft Matter (2015) DOI: 10.1039/C5SM02187A

18

K. Ueno, G. Bournival, E. J. Wanless, S. Nakayama, E. C. Giakoumatos, Y. Nakamura, S. Fujii

“Liquid Marble and Water Droplet Interactions and Stability”

Soft Matter 11, 7728-7738 (2015) DOI: 10.1039/C5SM01584G
[Back Cover]

17

下嶋康平,嘉流 望,藤井秀司,中村吉伸,浦濱圭彬

"粘着強さと粘着剤層厚さの関係の糸曳き挙動からの考察"

日本接着学会誌,51巻6号,184-191 (2015).

16

S. Fujii, K. Kobayashi, Y. Nakamura, T. Okubo

“Drying structures of micron-sized cationic gel spheres of lightly cross-linked poly(2-vinyl pyridine) in the deionized aqueous suspension”

Colloid Polym. Sci. 293, 1855-1864 (2015) DOI: 10.1007/s00396-015-3575-y

15

Y. Yamamoto, S. Fujii, K. Shitajima, K. Fujiwara, S. Hikasa, Y. Nakamura

"Soft polymer-silica nanocomposite particles as filler for pressure-sensitive adhesives"

Polymer 70, 77-87 (2015) DOI: 10.1016/j.polymer.2015.06.006

14

下嶋康平,嘉流 望,宗野孝俊,藤原和子,日笠茂樹,藤井秀司,中村吉伸,棚橋一郎

"銀/ポリビニルアルコールナノコンポジットのモルフォロジーと成分間相互作用"

日本接着学会誌,51巻4号,116-122 (2015).

13

K. Nakai, S. Fujii, Y. Nakamura, S. Yusa

“Thermo-responsive Liquid Marbles Prepared with Low Melting Point Powder”

Chem. Lett. (2015) in press

12

H. Imoto, Y. Nakao, N. Nishizawa, S. Fujii, Y. Nakamura, K. Naka

“Tripodal Polyhedral Oligomeric Silsesquioxanes as Novel Class of Three-Dimensional Emulsifiers”

Polym. J. (2015) in press

11

N. Karyu, K. Shitajima, S. Fujii, Y. Nakamura, Y. Urahama

"Contact time dependence of tack for crosslinked polyacrylic pressure-sensitive adhesives with two different molecular structures"

International Journal of Adhesion and Adhesives (2015) in press

10

中村吉伸,山﨑諒太,下嶋康平,嘉流 望,藤井秀司

"シランカップリング剤処理層中の物理吸着分子の熱重量分析による定量"

日本接着学会誌,51巻2号,42-48 (2015).

9

K. Shitajima, N. Karyu, S. Fujii, Y. Nakamura, Y. Urahama,

“Effect of Adhesive Thickness on The Stringiness of Crosslinked Polyacrylic Pressure-Sensitive Adhesives”

Journal of Applied Polymer Science (2015) in press DOI: 10.1002/APP.42210

8

S. Nakayama, K. Fukuhara, Y. Nakamura, S. Fujii

“Hollow microspheres fabricated from aqueous bubbles stabilized with latex particles”

Chem. Lett. 44(6), 773-775 (2015) http://dx.doi.org/10.1246/cl.150161
[Editor’s choice]

7

H. Takeoka, S. Wada, S. Yusa, S. Sakurai, Y. Nakamura, S. Fujii

“Thermo-Responsive Polypyrrole-Palladium Nanocomposite Particles Synthesized by Aqueous Chemical Oxidative Dispersion Polymerization”

Journal of The Adhesion Society of Japan (Special Issue, WCARP-V) 51(S1), 255-263 (2015)
[Journal Front Cover]
6

H. Takeoka, H. Hamasaki, Y. Harada, Y. Nakamura, S. Fujii

“Synthesis and characterization of polypyrrole-platinum nanocomposite-coated latex particles”

Colloid and Polymer Science (2015) DOI 10.1007/s00396-015-3534-7

5

Y. Nakamura, K. Yamamura, N. Karyu, K. Shitajima, S. Fujii, Y. Urahama

"Influences of Debonding Rate and Temperature on Tack Properties and Peel Behavior of Polyacrylic Block Copolymer/Tackifier System"

Journal of Adhesion Science and Technology (2015) in press: DOI: 10.1080/01694243.2015.1004509

4

C. E. McNamee, M. Kappl, S. Fujii, S. Yusa, Y. Azakami, H.-J. Butt

"Influence of particle charge, hydrophobicity and packing density on the forces and physical properties of a particulate monolayer at an air/aqueous interface"

Colloids and Surfaces A: Physicochemical and Engineering Aspects (2015) in press: doi:10.1016/j.colsurfa.2014.12.035
3

K. Shitajima, N. Karyu, S. Fujii, Y. Nakamura, Y. Urahama

"Sawtooth-Shaped Stringiness with Front Frame Formation for Polyacrylic Pressure-Sensitive Adhesives with Two Different Molecular Structures"

Journal of Adhesion Science and Technology 29(7), 609-624 (2015) doi.org/10.1080/01694243.2014.1000771

2

Y. Iwasaki, Y. Takahata, S. Fujii

"Self-setting particle-stabilized emulsion for hard-tissue engineering"

Colloids and Surfaces B: Biointerfaces 126, 394-400 (2015)        DOI:10.1016/j.colsurfb.2014.12.003

1

S. Fujii, K. Akiyama, S. Nakayama, S. Hamasaki, S. Yusa, Y. Nakamura

“pH- and temperature-responsive aqueous foams stabilized by hairy latex particles”

Soft Matter 11, 572-579 (2015) DOI: 10.1039/C4SM02236J

   
14 17

下嶋康平,嘉流 望,藤井秀司,中村吉伸,浦濱圭彬

"粘着剤層中のキャビテーション発生による剥離の抑制"

日本接着学会誌,50巻12号,420-427 (2014)

16

山本 亮太, 山本 大吾, 塩井 章久,  藤井 秀司,栗村 朋,  吉川 研一

"定常直流電場下における平板電極間での油中マイクロ粒子の配列と周期運動"

粉体工学会誌 51, 823-827 (2014)

15

D. T. W. Toolan, S. Fujii, S. J. Ebbens, Y. Nakamura, J. R. Howse

"On the mechanisms of colloidal self-assembly during spin-coating"

Soft Matter 10, 8804-8812 (2014) DOI: 10.1039/c4sm01711k

14

F. Postberg, J. K. Hillier, S. P. Armes, S. Bugiel, A. Butterworth, D. Dupin, L. A. Fielding, S. Fujii, Z. Gainsforth, E. Grün, Y. W. Li, R. Srama, V. Sterken, J. Stodolna, M. Trieloff, A. Westphal, C. Achilles, C. Allen, A. Ansari, S. Bajt, N. Bassim, R. K. Bastien, H. A. Bechtel, J. Borg, F. Brenker, J. Bridges, D. E. Brownlee, M. Burchell, M. Burghammer, H. Changela, P. Cloetens, A. Davis, R. Doll, C. Floss, G. Flynn, D. Frank, P. R. Heck, P. Hoppe, G. Huss, J. Huth, A. Kearsley, A. J. King, B. Lai, J. Leitner, L. Lemelle, A. Leonard, H. Leroux, R. Lettieri, W. Marchant, L. R. Nittler, R. Ogliore, W. J. Ong, M. C. Price, S. A. Sandford, J.-A. Sans Tressaras, S. Schmitz, T. Schoonjans, K. Schreiber, G. Silversmit, A. Simionovici, V. A. Solé, F. Stadermann, T. Stephan, R. M. Stroud, S. Sutton, P. Tsou, A. Tsuchiyama, T. Tyliczszak, B. Vekemans, L. Vincze, D. Zevin, M. E. Zolensky, >30,000 Stardust@home Dusters

"Stardust Interstellar Preliminary Examination IX: High-speed interstellar dust analog capture in Stardust flight-spare aerogel"

Meteoritics & Planetary Science 49(9), 1666-1679 (2014) DOI: 10.1111/maps.12173

13

S. Yusa, M. Morihara, K. Nakai, S. Fujii, Y. Nakamura, A. Maruyama, N. Shimada

“Thermo-responsive liquid marbles”

Polymer Journal 46, 145-148 (2014)

12

S. Fujii, Y. Eguchi, Y. Nakamura

"Pickering emulsion engineering: Fabrication of materials with multiple cavities"

RSC Advances 4(61), 32534-32537 (2014) DOI: 10.1039/c4ra04409f

11

K. Ito, K. Shitajima, N. Karyu, S. Fujii, Y. Nakamura, Y. Urahama

"Influence of the Degree of Crosslinking on the Stringiness of Crosslinked Polyacrylic Pressure-Sensitive Adhesives"

Journal of Applied Polymer Science 131(11), 5550-5560 (2014). DOI: 10.1002/app.40336

10

K. Ueno, S. Hamasaki, E. J. Wanless, Y. Nakamura, S. Fujii

"Microcapsules fabricated from liquid marbles stabilized with latex particles"

Langmuir 30 (11), 3051–3059 (2014) 10.1021/la5003435

9

山崎諒太,藤井秀司,中村吉伸,永田員也

"グリシドキシ基およびアミノ基を有するシランカップリング剤の各種無機粒子への反応性"

日本接着学会誌,50巻3号,82-87 (2014)

8

山崎諒太,藤井秀司,中村吉伸,永田員也

"2種類のシランカップリング剤混合系で表面処理した炭酸カルシウム充てんイソプレンゴムの力学特性"

日本接着学会誌,50巻4号,131-136 (2014)

7

S. Fujii, H. Hamasaki, H. Takeoka, T. Tsuruoka, K. Akamatsu, Y. Nakamura

"Electroless nickel plating on polymer particles"

Journal of Colloid and Interface Science 430, 47–55 (2014) DOI: 10.1016/j.jcis.2014.05.041

6

H. Takeoka, N. Fukui, S. Sakurai, Y. Nakamura, S. Fujii

"Nanomorphology Characterization of Sterically Stabilized Polypyrrole-Palladium Nanocomposite Particles"

Polymer Journal 46, 704-709 (2014) DOI: 10.1038/pj.2014.44

5

K. Ito, K. Shitajima, N. Karyu, S. Fujii, Y. Nakamura, Y. Urahama

"Influence of the Interfacial Adhesion on the Stringiness of Crosslinked Polyacrylic Pressure-Sensitive Adhesives"

Journal of Applied Polymer Science (2014) in press 10.1002/app.40869

4

S. Fujii, Y. Yamashita, Y. Nakamura, A. Tsuchida, T. Okubo

"Cationic gel crystals and amorphous-solids of lightly cross-linked poly (2-vinylpyridine) spheres in the deionized aqueous suspension"

Colloid and Polymer Science 292, 1627-1637 (2014) DOI 10.1007/s00396-014-3228-6

3

K. Shitajima, N. Karyu, K. Takada, S. Fujii, Y. Nakamura, Y. Urahama

"Temperature Dependence of Tack for a Polyacrylic Block Copolymer/Tackifier Blend"

Polym. Polym. Compos. 28(19), 1895-1906 (2014) DOI:10.1080/01694243.2014.926576

2

Y. Nakamura, R. Yamazaki, T. Fukuda, K. Shitajima, S. Fujii, M. Sasaki

"Structure of Silane Layer Formed on Silica Particle Surfaces by Treatment with Silane Coupling Agents Having Various Functional Groups"

Journal of Adhesion Science and Technology (2014) in press DOI:10.1080/01694243.2014.926576

1

S. Fujii, Y. Nakamura, A. Tsuchida, T. Okubo

"Colloidal crystallization of poly(n-butyl acrylate) spheres in deionized aqueous suspension and the melting during dryness"

Colloid and Polymer Science 292, 2303–2310 (2014) DOI 10.1007/s00396-014-3277-x

 
13 28

中村吉伸,山﨑諒太,下嶋康平,藤井秀司

“シリカ,アルミナ,炭酸カルシウムへのシランカップリング剤の反応性”

The Journal of Center for the Global Study of Cultural Heritage and Culture (関西大学紀要), 1(1), 167-176 (2013)

27

中村吉伸,今村圭吾,山村和広,藤井秀司,浦濱圭彬,佐々木眞利子

“アクリル系ブロックコポリマーのタック特性におよぼす粘着剤層と基材厚さの影響”

日本接着学会誌, 49(2), 50-55 (2013)

26

中村吉伸,福田知由,仮屋瑛二,藤井秀司

“PMMA/PVAブレンドの成分間の相互作用”

日本接着学会誌, 49(7), 237-243 (2013)

25

K. Nakai, S. Fujii, Y. Nakamura, S. Yusa

Ultraviolet light-responsive liquid marbles”

Chem. Lett. 42, 586–588 (2013) DOI: 10.1246/cl.130119

24

T. Okubo, S. Fujii, Y. Nakamura

Drying dissipative structures of cationic gel spheres of lightly cross-linked poly (2-vinyl pyridine) (170 ~ 180 nm in diameter) in the deionized aqueous suspension”

 Colloid and Polymer Science 291, 2805-2813 (2013) DOI: 10.1007/s00396-013-3030-x

23

T. Fukuda, S. Fujii, Y. Nakamura, M. Sasaki

" Tensile properties of styrene-butadiene rubber/silica composites with mercapto functional silane coupling agents: influences of loading method and alkoxy group number"

Composite Interface 20(8), 635-646 (2013) http://dx.doi.org/10.1080/15685543.2013.832576

22.

K. Yamamura, K. Shitajima, S. Fujii, Y. Nakamura, Y. Hamada, S. Hagiwara, H. Kishi, Y. Urahama, M. Sasaki

"Temperature Dependence of Tack and Pulse NMR Analysis of Polystyrene Block Copolymer/Tackifier System"

J. Adhesion Sci. Technol., 27(24), 2727-2740 (2013). DOI: 10.1080/01694243.2013.810031

21.

山村和広,藤井秀司,中村吉伸,浦濱圭彬

"アクリル系ブロックコポリマーのタックと剥離挙動におよぼす速度と温度の影響"

日本接着学会誌,49 (6),204-210 (2013)

20.

T. Okubo, S. Fujii, K. Aono, Y. Nakamura

“Cationic gel crystals of lightly cross-linked poly (2-vinylpyridine) spheres (170 ~ 180 nm in diameter) in the deionized aqueous suspension”

Colloid and Polymer Science 291, 2569-2577 (2013) 10.1007/s00396-013-3000-3

19.

福田知由,藤井秀司,中村吉伸*, 佐々木眞利子

“シリカ粒子充てんスチレンブタジエンゴムの力学特性とパルスNMRによる界面領域の構造解析:シランカップリング剤前処理とインテグラルブレンドの比較”

日本接着学会誌,49(4),112-119 (2013)

18.

中村吉伸,山村和広,筒井晋司,今村圭吾,藤井秀司,佐々木眞利子,浦濱圭彬

“架橋アクリル系粘着剤の接触時間にともなうタックの上昇性”

日本接着学会誌, 49(3), 76-81 (2013)

17.

T. Fukuda, S. Fujii, Y. Nakamura, M. Sasaki,

"Mechanical Properties of Silica Particle-Filled Styrene-Butadiene Rubber Composites Containing Polysulfide-Type Silane Coupling Agents: Influence of Loading Method of Silane"

Journal of Applied Polymer Science 130(1), 322-329 (2013) DOI: 10.1002/app.39175.

16.

K. Nakai, H. Nakagawa, K. Kuroda, S. Fujii, Y. Nakamura, S. Yusa

“Near-infrared-responsive liquid marbles stabilized with carbon nanotubes”

Chem. Lett. 42, 719–721 (2013) doi.org/10.1246/cl.130240

15.

S. Fujii, Y. Yokoyama, Y. Miyanari, T. Shiono, M. Ito, S. Yusa, Y. Nakamura

“Micrometer-sized gold-silica Janus particles as particulate emulsifiers”

Langmuir 29, 5457−5465 (2013) DOI: 10.1021/la400697a

14.

S. Fujii, H. Hamasaki, H. Abe, S. Yamanaka, A. Ohtaka, E. Nakamura, Y. Nakamura

“One-step synthesis of magnetic iron-conducting polymer-palladium ternary nanocomposite microspheres and their use as recyclable catalyst”

J. Mater. Chem. A. 1(14), 4427-4430 (2013) DOI: 10.1039/c3ta10389g

13.

Y. Nakamura, K. Imamura, K. Yamamura, S. Fujii, Y. Urahama

" Influence of Crosslinking and Peeling Rate on Tack Properties of Polyacrylic Pressure-Sensitive Adhesives"

Journal of Adhesion Science and Technology 27(17), 1951-1965, (2013) DOI:10.1080/01694243.2013.766564

12.

H. Shinto, T. Hirata, T. Fukasawa, S. Fujii, H. Maeda, M. Okada, Y. Nakamura, T. Furuzono

“Effect of interfacial serum proteins on melanoma cell adhesion to biodegradable poly(L-lactic acid) microspheres coated with hydroxyapatite”

Colloids and Surfaces B: Biointerfaces, 108, 8–15 (2013) DOI: 10.1016/j.colsurfb.2013.02.021 

11.

Y. Nakamura, S. Nakano, K. Ito, K. Imamura, S. Fujii, M. Sasaki, Y. Urahama

“Adhesion properties of polyurethane pressure-sensitive adhesive”

Journal of Adhesion Science and Technology 27(3), 263-277 (2013) DOI:10.1080/01694243.2012.705516

10.

S. Fujii, M. Okada, T. Nishimura, T. Sugimoto, H. Maeda, H. Hamasaki, T. Furuzono, Y. Nakamura

“Hydroxyapatite-coated poly(ε-caprolactone) microspheres fabricated via a Pickering emulsion route: Effect of fabrication parameters on diameter and chemical composition”

Composite Interfaces 20(1), 1-12 (2013) DOI:10.1080/15685543.2013.762893

9.

T. Fukuda, R. Yamazaki, S. Fujii, Y. Nakamura, M. Sasaki

"Influences of the alkoxy group number and treatment condition on the structure of glycidoxy functional silane-treated layer on silica particles analyzed by 1H pulse NMR"

Journal of Adhesion Science and Technology 27(15), 1641-1651 (2013) DOI:10.1080/01694243.2012.747734

8.

T. Okubo, S. Fujii, K. Aono, Y. Nakamura, A. Tsuchida

“Colloidal crystallization of cationic gel spheres of lightly cross-linked poly(2-vinylpyridine) in the deionized aqueous suspension”

Colloid and Polymer Science 291, 1201-1210 (2013) DOI 10.1007/s00396-012-2850-4 

7.

K. Yamamura, S. Fujii, Y. Nakamura, K. Fujiwara, S. Hikasa and Y. Urahama

" Influence of diblock addition on tack in a polyacrylic triblock copolymer/tackifier system measured using a probe tack test"

Journal of Applied Polymer Science 129(3), 1008-1018 (2013) DOI: 10.1002/app.38772

6.

S. Fujii, S. Yamashita, Y. Kakigi, K. Aono, S. Hamasaki, S. Yusa, Y. Nakamura

“Thiol-terminated hydroxy-functional polymer as a transtab toward polymer latex particles”

Colloid and Polymer Science 291, 1171-1180 (2013) 10.1007/s00396-012-2845-1 

5.

T. Okubo, S. Fujii, K. Aono, Y. Nakamura

“Drying dissipative structures of lightly cross-linked poly(2-vinylpyridine) cationic gel  spheres stabilized with poly(ethylene glycol) in the deionized aqueous suspension”

Colloid and Polymer Science 291, 1019–1030 (2013) DOI 10.1007/s00396-012-2825-5 

4.

Y. Nakamura, Y. Nishida, T. Fukuda, S. Fujii, M. Sasaki

“Mechanical properties of silane-treated silica particle-filled polyisoprene composites: Influence of alkoxy group mixing ratio in silane coupling agent containing mercapto group”

Journal of Applied Polymer Science 128(4), 2548-2555 (2013) DOI: 10.1002/app.38442

3.

H. Hamasaki, N. Fukui, S. Fujii, S. Yusa, Y. Nakamura

“Sterically stabilized polypyrrole-palladium nanocomposite particles synthesized by aqueous chemical oxidative dispersion polymerization”

Colloid and Polymer Science 1, 223-230 (2013) DOI: 10.1007/s00396-012-2646-6 

2.

S. Fujii, Y. Miyanari, T. Nishimura, Y. Yokoyama, S. Hamasaki, M. Okada, T. Furuzono, S. Matsuda, H. Takamori, Y. Nakamura

“In vitro degradation of hydroxyapatite nanoparticle-coated biodegradable microspheres”

Polymer Degradation and Stability 98, 377-386 (2013) 10.1016/j.polymdegradstab.2012.09.003 

1.

福田知由,山崎諒太,青木美波,藤井秀司,中村吉伸,佐々木眞利子

“シリカ粒子表面上の処理層の構造におよぼすシランカップリング剤の有機官能基とアルコキシ基数の影響”

日本接着学会誌  49(1), 4-10 (2013) 

   
12 15.

山村和広,藤井秀司,中村吉伸,藤原和子,日笠茂樹,浦濱圭彬

“アクリル系ブロックコポリマー/タッキファイヤ系のタック特性と剥離挙動”

日本接着学会誌  48(12), 423-429 (2012) 

14.

Y. Nakamura, Y. Nishida, T. Fukuda, S. Fujii, M. Sasaki

1H pulse NMR analysis of silane-treated layers on glass fiber surfaces”

Composite Interfaces (2012) DOI:10.1080/15685543.2012.732379 

13.

H. Hamasaki, Y. Maekawa, S. Matsuzawa, Y. Nakamura, S. Fujii

“Synthesis of poly(3,4-ethylenedioxythiophene)-palladium nanocomposite-coated polymer particles by chemical oxidative seeded dispersion polymerization”

Chem. Lett. 41(12), 1658-1659 (2012)  

12.

S. Fujii, M. Kappl, H.-J. Butt, T. Sugimoto, Y. Nakamura

“Soft Janus colloidal crystal film”

Angew. Chem. Int. Ed. 51, 9809-9813 (2012) 

11.

 H. Hamasaki, H. Kanadani, Y. Nakamura, S. Fujii

“One step synthesis of conducting polymer-palladium nanocomposite fibers by aqueous chemical oxidative polymerization”

Chem. Lett. 41(9), 982-983 (2012) 

10.

M. Okada, H. Maeda, S. Fujii, Y. Nakamura, T. Furuzono

"Formation of Pickering Emulsions Stabilized via Interaction between Nanoparticles Dispersed in Aqueous Phase and Polymer End Groups Dissolved in Oil Phase"

Langmuir 28(25), 9405–9412 (2012)

9. S. Fujii, M. Okada, T. Nishimura, H. Maeda, T. Sugimoto, H. Hamasaki, T. Furuzono, Y. Nakamura
“Hydroxyapatite-armored poly(ε-caprolactone) microspheres and hydroxyapatite microcapsules fabricated via Pickering emulsion route”
Journal of Colloid and Interface Science 374, 1-8 (2012)
[Journal Front Cover][Editor’s choice]
8. S. Fujii, K. Aono, M. Suzaki, S. Hamasaki, S. Yusa, Y. Nakamura
“pH-Responsive hairy particles synthesized by dispersion polymerization with a macroinitiator as an inistab and their use as a gas-sensitive liquid marble stabilizer”
Macromolecules 45 (6), 2863–2873 (2012)
7.

M. Okada, S. Fujii, T. Nishimura, Y. Nakamura, T. Furuzono 

“Solvent-free formation of hydroxyapatite coated biodegradable particles via nanoparticle-stabilized emulsion route”

Applied Surface Science 262, 39-44 (2012) 

6.

T. Iwamoto, T. Terada, Y. Kogai, M. Okada, S. Fujii, T. Furuzono

“Development of Microspheres Covered with Hydroxyapatite Nanocrystals as Cell Scaffold for Angiogenesis”

Functional Materials Letters 5(2), 1260010-1-6 (2012) 

5. M. Ito, R. Enomoto, K. Osawa, Y. Daiko, T. Yazawa, S. Fujii, Y. Yokoyama, Y. Miyanari, Y. Nakamura, A. Nakao, Y. Iwasaki, S. Yusa,
"pH-responsive flocculation and dispersion behavior of Janus particles in water"
Polymer Journal 44, 181-188 (2012)
4. S. Fujii, S. Matsuzawa, H. Hamasaki, Y. Nakamura, A. Bouleghlimat, N. J. Buurma
"Polypyrrole-palladium nanocomposite coating of micrometer-sized polymer particles toward a recyclable catalyst"
Langmuir 28(5), 2436–2447 (2012)
3.

中村吉伸,西田祐詞,藤井秀司,佐々木眞利子
"ガラス繊維表面上のメルカプト基含有シランカップリング剤処理層のモルフォロジーと1HパルスNMRによる構造解析"
日本接着学会誌 48(1), 4-9 (2012)

2. Y. Nakamura, K. Imamura, K. Ito, S. Nakano, A. Sueoka, S. Fujii, M. Sasaki and Y. Urahama,
"Contact time and temperature dependencies of tack in polyacrylic block copolymer pressure-sensitive adhesives measured by the probe tack test"
Journal of Adhesion Science and Technology 26, 231–249 (2012)
1. Y. Nakamura, Y. Sakai, K. Imamura, K. Ito, S. Fujii, Y. Urahama,
"Effects of the compatibility of a polyacrylic block copolymer/tackifier blend on the phase structure and tack of a pressure-sensitive adhesive"
the Journal of Applied Polymer Science 123(5), 2883-2893 (2012)
   
11 22. S. Fujii, M. Mochizuki, K. Aono, S. Hamasaki, R. Murakami, Y. Nakamura
"pH-Responsive aqueous foams stabilized by hairy latex particles"
Langmuir 27(21), 12902-12909 (2011)
21. M. Inoue, S. Fujii, Y. Nakamura, Y. Iwasaki, S. Yusa,
"pH-Responsive disruption of "liquid marbles" prepared from water and poly(6-(acrylamido)hexanoic acid)-grafted silica particles"
Polymer Journal 43, 778-784(2011)
[Journal Front Cover][2nd most downloaded article in Polymer Journal(2011.9.1-9.30)]
20. A. Ohtaka, Y. Kono, T. Teratani, S. Fujii, S. Matsuzawa, Y. Nakamura, R. Nomura,
"Suzuki coupling reaction in water with polypyrrole-palladium nanocomposite-coated latex particles"
Catalysis Letters 141, 1097-1103 (2011)
19. S. Fujii, M. Suzaki, S. P. Armes, D. Dupin, S. Hamasaki, K. Aono, Y. Nakamura
"Liquid marbles prepared from pH-responsive sterically-stabilized latex particles"
Langmuir 27(13), 8067-8074 (2011)
18. S. Fujii, M. Suzaki, Y. Kakigi, K. Aono, S. Yusa, Y. Nakamura,
"Dispersion polymerization using hydroxy-functional macroazoinitiators as an inistab"
Journal of Polymer Science Part A: Polymer Chemistry 49(7), 1633-1643 (2011)
17. X. Liu, M. Okada, H. Maeda, S. Fujii, T. Furuzono,
"Hydroxyapatite/biodegradable poly-(L-lactide-co-caprolactone) composite microparticles as injectable scaffold by a Pickering emulsion route"
Acta Biomaterialia 7, 821-828 (2011)
16. E. M. Mellado, K. Hornung, R. Srama, J. Kissel, S. P. Armes, S. Fujii,
"Mass spectrometry of impact fragmented polymers: the role of target properties",
International Journal of Impact Engineering 38(6), 486-494 (2011)
15. Y. Nakamura, Y. Nishida, H. Honda, S. Fujii, M. Sasaki,
"Surface analysis of silanenanolayer on silica particles using 1H pulse NMR"
Journal of Adhesion Science and Technology 25, 2703-2716 (2011)
14. 中村吉伸,酒井 悠,伊東慶子,今村圭吾,藤井秀司,浦濱圭彬
"アクリル系ブロックコポリマー/タッキファイヤ系のタック特性に及ぼす相構造の影響"
日本接着学会誌 47(9), 344-353 (2011)
13. Y. Nakamura, M. Adachi, Y. Kato, S. Fujii, M. Sasaki, Y. Urahama, S. Sakurai
"Effects of polystyrene block content on morphology and adhesion property of polystyrene block copolymer"
Journal of Adhesion Science and Technology 25, 869-881 (2011)
12. Y. Nakamura, M. Adachi, K. Ito, S. Fujii, M. Sasaki, Y. Urahama, S. Sakurai
"Effects of compatibility between tackifier and polymer on adhesion property and phase structure: Tackifier-added polystyrene-based triblock/diblockcopolymer blend system"
Journal of Applied Polymer Science 120(4), 2251-2260 (2011)
11. 中村吉伸,西田祐詞,藤井秀司,佐々木眞利子
"シリカ表面上のメルカプト基含有シランカップリング剤処理層の1HパルスNMRによる構造解析:アルコキシ基数の異なる分子の混合比と付着量の影響"
ネットワークポリマー 32(1), 19-25 (2011)
10. 中村吉伸,加藤陽介,今村圭吾,藤井秀司,浦濱圭彬,永田員也
"SEBSの分子構造が相構造と接着特性におよぼす影響"
日本接着学会誌4 7(4), 138-145 (2011)
9. 伊東慶子,浦濱圭彬,中村吉伸
"粘着剤剥離挙動の研究 第1報 架橋度と剥離荷重がアクリル系粘着剤糸曳き挙動に与える影響"
日本接着学会誌 47(8), 294-301 (2011)
8. 浦濱圭彬,濱田佑基,岸 肇,伊東慶子,中村吉伸
"パルス法NMRによる多成分系の緩和スペクトル 第四報パルス法NMR,動的粘弾性によるシリコーン粘着剤タック特性の解析"
日本接着学会誌 47(3), 98-105 (2011)
7. 日笠茂樹,永田員也,中村吉伸
"CaCO3粒子サイズがPP/SEBS/CaCO3複合材料の衝撃強度に及ぼす影響"
成形加工 23(7),441-444 (2011)
6. 日笠茂樹,永田員也,中村吉伸
"PP/エラストマー/シリカ複合材料の力学特性におよぼすシリカ粒子径の影響"
日本接着学会誌 47(7),255-261 (2011)
5. 浦濱圭彬,佐々木眞利子,加藤陽介,伊東慶子,中村吉伸,岸 肇
"パルス法NMRによる多成分系の緩和スペクトル 第三報スチレン系ブロックポリマーの緩和特性"
日本接着学会誌 47(2), 46-52 (2011)
4.

M. Inoue, S. Yusa, Y. Morishima, Y. Nakamura, S. Fujii, Y. Iwasaki, D. Chaudhary

“Encapsulation of water with pH-responsive polymer grafted silica gel particles”

Chemeca2011 2665-2673 (2011).

3.

M. Ito, S. Yusa, S. Fujii, Y. Yokoyama, Y. Miyanari, Y. Nakamura, Y. Iwasaki, D. Chaudhary

“Synthesis of micrometer-size particles having a pH-responsive surface at one side”

Chemeca2011 2148-2154 (2011)

2. S. Hikasa, K. Nagata and Y. Nakamura
"Influence of Filler Size on Impact Properties of PP/Elastomer/Filler Ternary Composites"
J. Adhesion Sci. Technol. 25, 2615-2628 (2011)
1. S. Hikasa, K. Nagata and Y. Nakamura
"Influences of Morphology on Mechanical Properties of Polypropylene/Elastomer/CaCO3 Ternary Composites"
Compos. Interfaces 18(1), 1-22 (2011)
   
10 22. S. Fujii, S. Kameyama, D. Dupin, S. P. Armes, M. Suzaki, Y. Nakamura
"pH-Responsive liquid marbles stabilized with poly(2-vinylpyridine) particles"
Soft Matter 6, 635-640(2010)
21. S. Fujii, S. Matsuzawa, Y. Nakamura, A. Ohtaka, T. Teratani, K. Akamatsu, T. Tsuruoka, H. Nawafune
"Synthesis and characterization of polypyrrole-palladium nanocomposite-coated latex particles and their use as a catalyst for a Suzuki coupling reaction in aqueous media"
Langmuir 26(9), 6230-6239 (2010)
20. S. Fujii, S. Matsuzawa, Y. Nakamura
"One-pot synthesis of conducting polymer-coated latex particles: ammonium persulfate as free radical initiator and chemical oxidant"
Chemical Communications 46, 7217-7219 (2010)
19. S. Fujii, M. Suzaki, Y. Nakamura, K. Sakai, N. Ishida, S. Biggs
"Surface characterization of nanoparticles carrying pH-responsive polymer hair"
Polymer 51, 6240-6247 (2010)
18. S. Fujii, Y. Nishimura, A. Aichi, S. Matsuzawa, Y. Nakamura, K. Akamatsu, H. Nawafune
"A simple one-step route to polyaniline-silver nanocomposite particles and their application as a colored particulate emulsifier"
Synthetic Metals 160, 1433-1437(2010)
17. H. Maeda, M. Okada, S. Fujii, Y. Nakamura, T. Furuzono
"Hydroxyapatite nanoparticles as particulate emulsifier: Preparation of multiple emulsion and multihollow microsphere"
Langmuir 26(17), 13727-13731 (2010)
16. B. M. Reis, S. P. Armes, S. Fujii, S. Biggs
"Characterisation of the dispersion stability of a stimulus responsive core-shell colloidal latex"
Colloids and Surfaces A: Physicochemical and Engineering Aspects 353, 210-215 (2010)
15. K.Akamatsu, M. Shimada, T. Tsuruoka, H. Nawafune, S. Fujii, Y. Nakamura
"Synthesis of pH-responsive nanocompositemicrogels with size-controlled gold nanoparticles from ion-doped, lightly cross-linked poly(vinylpyridine)"
Langmuir 26(2), 1254-1259 (2010)
14. Q. Yuan, O. J. Cayre, S. Fujii, S. P. Armes, R. A. Williams, S. Biggs
"Responsive core-shell latex particles as colloidosomemicrocapsule membranes"
Langmuir 26(23), 18408-18414 (2010)
13. M. Pi, T. Yang, J. Yuan, S. Fujii, Y. Kakigi, Y. Nakamura, S. Cheng
"Biomimetic synthesis of raspberry-like hybrid polymer-silica core-shell nanoparticles by templating colloidal polymer particles with hairy polyamine shell"
Colloids and Surfaces B: Biointerfaces 78, 193-199 (2010)
12. Y. Nakamura, T. Gotoh, H. Honda, S. Fujii, K. Nagata
"AFM observation of a mica surface treated with silanecoupling agent having a mercaptogroup"
Composite Interfaces 17, 395-404 (2010)
11. Y. Nakamura, M. Adachi, S. Fujii, M. Sasaki, Y. Urahama, S. Sakurai
"Adhesion property and morphology of styrenictriblock/diblock copolymer blends"
the Journal of Applied Polymer Science 118, 1766-1773 (2010)
10. 中村吉伸、西田祐詞、本田裕彰、藤井秀司、佐々木眞利子 
"無機粒子表面上のアルコキシ基数の異なるシランカップリング剤による混合処理層のパルスNMRによる構造解析"
日本接着学会誌 46(8), 283-288 (2010)
9. 中村吉伸、加藤陽介、今村圭吾、足立 学、藤井秀司、佐々木眞利子、浦濱圭彬
"スチレン系ブロックコポリマーの接着特性とパルスNMR による緩和挙動におよぼすトリブロック/ジブロックブレンド比の影響"
日本接着学会誌 46(10), 359-365 (2010)
8. 中村吉伸、今村圭吾、伊東慶子、茄子由香利、太田和栄、藤井秀司、佐々木眞利子、浦濱圭彬
"プローブタック試験によるタックの接着時間依存性と温度依存性から評価したアクリル系ブロックコポリマーの接着特性"
日本接着学会誌 46(12), 466-472 (2010)
7. M. Imanaka , M. Takagishi, N. Nakamura, M. Kimoto
"R-curve characteristics of adhesives modified with high rubber content under mode I loading"
Int. J. Adhesion Adhesives 30, 478-484 (2010)
6. 日笠茂樹,永田員也,中村吉伸
"PP/エラストマー/フィラー複合材料の力学特性に関するエラストマーおよびフィラーの効果"
高分子論文集 67(11), 615-625 (2010)
5. 日笠茂樹,永田員也,中村吉伸
"PP/エラストマー/CaCO3複合材料においてモルフォロジーが力学特性に及ぼす影響"
成形加工 22(8), 422-426 (2010)
4. 日笠茂樹,永田員也,中村吉伸
"PP/エラストマー/CaCO3複合材料の力学特性に及ぼすCaCO3の粒子径の効果"
日本接着学会誌 46(7),  252-259 (2010)
3. 日笠茂樹,永田員也,中村吉伸
"PP/エラストマー/CaCO3三元複合材料の衝撃特性とモルフォロジーに及ぼすエラストマーの併用の効果"
高分子論文集 67(4), 263-269 (2010)
2. M. Sasaki, M. Adachi, Y. Kato, S. Fujii, Y. Nakamura, Y. Urahama and S. Sakurai
"Adhesion Property and Morphology of Styrene Triblock/Diblock Copolymer Blends"
J. Appl. Polym. Sci.118(3)1766-1773 (2010)
1. 日笠茂樹,永田員也,中村吉伸
"ポリプロピレン複合材料における分散相とそのモルフォロジーが力学特性に及ぼす影響"
日本接着学会誌 46(2)4052 (2010)
   
09 17. D. Dupin, S. P. Armes, S. Fujii
"Stimulus-responsive liquid marble"
Journal of the American Chemical Society 131, 5386-5387(2009)
[Research Highlights, Nature Materials, Vol. 8, 364, May 2009]
16. S. Fujii, D. Dupin, T. Araki, S. P. Armes, H. Ade
"The first direct imaging of electrolyte-induced deswellingbehavior of pH-responsive microgels in aqueous media using scanning transmission x-ray microscopy"
Langmuir 25, 2588-2592(2009)
15. S. Fujii, M. Okada, H. Sawa, T. Furuzono, Y. Nakamura,
"Hydroxyapatite Nanoparticles as Particulate Emulsifier: Fabrication of Hydroxyapatite-coated biodegradable microspheres"
Langmuir 25(17), 9759-9766 (2009)
14. S. Fujii, Y. Kakigi, M. Suzaki, S. Yusa, M. Muraoka, Y. Nakamura,
"Synthesis of stimuli-responsive macroazoinitiators and their use as an inistab toward hairy polymer latex particles"
Journal of Polymer Science Part A: Polymer Chemistry 47, 3431-3443 (2009)
13. S. Fujii, A. Aichi, M. Muraoka, N. Kishimoto, K. Iwahori, Y. Nakamura, I. Yamashita
"Ferritin as a bionano-particulate emulsifier"
Journal of Colloid and Interface Science 338, 222-228 (2009)
12. S.-H. Lee, M. Fujisawa, K. Teshima, S. Fujii, M. Endo, S. Oishi
"Fabrication of highly ordered, macroporous Na2W4O13arrays by spray pyrolysis using polystyrene colloidal crystals as templates"
Physical Chemistry Chemical Physics 11, 3628-3633 (2009)
11. R. Srama, W. Woiwode, F. Postberg, S. P. Armes, S. Fujii, D. Dupin, J. Ormond-Prout, Z. Sternovsky, S. Kempf, G. Moragas-Klostermeyer, A. Mocker, E. Grün
"Mass spectrometry of hyper-velocity impacts of organic micrograins"
Rapid Communications in Mass Spectrometry 23(24), 3895-3906 (2009)
10. M. Okada, S. Fujii, H. Maeda, Y. Nakamura, X. Liu, T. Furuzono,
"Preparation of Pickering-type emulsions stabilized via interaction between hydroxyapatite nanoparticle and polymer at interface between water and oil phases"
Bioceramics 22, 623-626 (2009)
9. X. Liu, M. Okada, H. Maeda, S. Fujii, Y. Nakamura, T. Furuzono,
"Biodegradable organic-inorganic core/shell microspheres by a HAp-stabilized Pickering emulsion route"
Archives of BioCeramicsReserch 9, 35-38 (2009)
8. Y. Nakamura, H. Honda, A. Harada, S. Fujii, K. Nagata
"Mechanical properties of silane-treated silica-particle-filled polyisoprene rubber composites: Effects of loading amount and alkoxy group numbers of a silane coupling agent containing mercapto group"
Journal of Applied Polymer Science 113(3), 1507-1514(2009)
7. Y. Nakamura, M. Adachi, Y. Tachibana, Y. Sakai, S. Nakano, S. Fujii, M. Sasaki, Y. Urahama
"Tack properties of acrylic block copolymer/tackifier system"
International Journal of Adhesion & Adhesives 29, 806-811 (2009)
6. 佐々木眞利子、本田裕彰、仲野慎治、藤井秀司、中村吉伸、永田員也
"シリカ粒子表面のシランカップリング剤処理層のパルスNMRによる構造解析"
日本接着学会誌 45(3), 88-93(2009)
5. 中村吉伸、足立学、橘祐太、酒井悠、仲野慎治、藤井秀司、佐々木眞利子、浦濱圭彬
"アクリル系ブロックポリマー/タッキファイヤ系のタック特性"
日本接着学会誌 45(4), 130-138(2009)
4. S. Hikasa, K. Nagata and Y. Nakamura
"Influence of elastomer-modification on impact strength of PP/elastomer/CaCO3 composite"
J. Adhesion Sci. Technol. 23, 1993-2012 (2009)
3. 日笠茂樹,永田員也,中村吉伸
"PP/エラストマー/微粒子炭酸カルシウム複合材料の衝撃強度におよぼすエラストマー変性の効果"
日本接着学会誌 45(6), 220-228 (2009)
2. S. Hikasa, K. Nagata, K. Miyahara, T. Izumi, T. Suda, A. Toyohara, A. Kato and Y. Nakamura
"Influence of Incorporation of Fine CaCO3 Particles on Impact Strength of PP/SEBS Blend"
J. Appl. Polym. Sci.114 (2), 919-927 (2009)
1. M. Imanaka, S. Motohashi, K. Nishi, Y. Nakamura, M. Kimoto
"Crack-growth behavior of epoxy adhesives modified with liquid rubber and cross-linked rubber particles under mode I loading"
Int. J. Adhesion Adhesives 29, 45-55 (2009)
   
08 7. 藤井秀司、毛利美奈子、愛知敦、赤松謙祐、縄舟秀美、中村吉伸、D. P. Randall
"有機-無機同時析出法によるポリピロール-金ナノコンポジットで覆われたポリスチレン微粒子の創出"
日本接着学会誌 44(1), 12-18 (2008)
6. M. Sasaki, K. Fujita, M. Adachi, S. Fujii, Y. Nakamura, Y. Urahama
"The effect of tackifier on phase structure and peel adhesion of a triblockcopolymer pressure sensitive adhesive"
International Journal of Adhesion and Adhesives 28(7), 372-381 (2008)
5. Y. Nakamura, Y. Sakai, M. Adachi, S. Fujii, M. Sasaki, Y. Urahama
"Effects of compatibility of poly(methyl methacrylate)-b-polybutylacrylate-b-poly(methyl methacrylate) triblock copolymer and tackifier on phase structure and peel adhesion of their blend"
Journal of Adhesion Science and Technology 22, 1313-1331 (2008)
4. 中村吉伸、五島卓海、本田裕彰、神山真理子、中俣武士、藤井秀司、飯田健郎、永田員也
"ガラスビーズ充てんポリイソプレンゴムの力学特性におよぼすメルカプト基含有シランカップリング剤による表面処理の影響"
日本接着学会誌 44(9), 341-348(2008)
3. 中村吉伸,本田裕彰,原田篤史,鍛示えりな,藤井秀司,飯田健郎,永田員也
"シリカ粒子充てんポリイソプレンゴムの力学特性におよぼすメルカプト基含有シランカップリング剤による表面処理の影響"
日本ゴム協会誌 81(11), 454-459 (2008)
2. 平野 寛,野口一輝,中村吉伸,門多丈治,千金正也,長谷川喜一
"含硫黄ポリマー改質エポキシ樹脂硬化物の銅箔に対する接着性"
日本接着学会誌 44, 132 (2008)
1. M. Imanaka, R. Orita, Y. Nakamura, M. Kimoto
"Comparison of failure mechanisms between rubber-modified and unmodified epoxy adhesives under mode II loading condition"
J. Mater. Sci. 43, 3223-3233 (2008)
   
07 11. S. Fujii, A. Aichi, K. Akamatsu, H. Nawafune, Y. Nakamura
"One-step synthesis of polypyrrole-coated silver nanocomposite particles and their application as a coloured particulate emulsifier"
Journal of Materials Chemistry 17, 3777-3779 (2007)
[Selected in top ten most-downloaded articles in J. Mater. Chem.: September, 2007]
10. S. Fujii, M. Okada, T. Furuzono,
"Hydroxyapatite nanoparticles as stimulus-responsive particulate emulsifiers"
Journal of Colloid and Interface Science 315, 287-296 (2007)
9. A. Schmid, S. Fujii, S. P. Armes, C. A. P. Leite, F. Galembeck, H. Minami, N. Saito, M. Okubo
"Polystyrene-silica colloidal nanocomposite particles prepared by alcoholic dispersion polymerization"
Chemistry of Materials 19, 2435-2445 (2007)
[Selected as one of most-accessed articles in Chemistry of Materials: April-June, 2007]
8. B. P. Binks, R. Murakami, S. P. Armes, S. Fujii, A. Schmid
"pH-Responsive aqueous foams stabilized by ionisablelatex particles"
Langmuir 23, 8691-8694 (2007)
7. A. M. Imroz Ali, P. Pareek, L. Sewell, A. Schmid, S. Fujii, S. P. Armes, I. M. Shirley
"Synthesis of poly(2-hydroxypropyl methacrylate) latex particles via aqueous dispersion polymerization"
Soft Matter 3, 1003-1013 (2007)
6. S. L. Kettlewell, A. Schmid, S. Fujii, D. Dupin, S. P. Armes,
"Is latex surface charge an important parameter for foam stabilization?"
Langmuir 23, 11381-11386 (2007)
5. K. Takeuchi, A. Kamaguchi, M. Nabeta, S. Fujii, Y. Nakamura, T. Iida
"Morphology and viscoelastic properties of poly(vinyl chloride)/poly(vinyl alcohol) incompatible blend"
Polymer and Polymer Composite 15(5), 371-378 (2007)
4. 永田員也,日笠茂樹,酒木大助,小林淳,宮原謙二,和泉俊弘,須田敬也,豊原麻美,加藤淳,中村吉伸
"EPDMブレンドPP/炭酸カルシウム・タルク複合(ハイブリッド)フィラーの力学特性"
日本接着学会誌 43(9), 343-349 (2007)
3. 中村吉伸,竹内一眞,鍋田宗明,仮屋瑛二,飯田健郎
"PMMA/PVAブレンドの成分間の相互作用に及ぼすPVAのケン化度の影響"
日本接着学会誌 43(6), 230-235 (2007)
2. 中村吉伸,竹内一眞,釜口章弘,鍋田宗明,飯田健郎
"PVC/PVAブレンドのモルフォロジーと力学特性"
日本接着学会誌 43(2), 43-49 (2007)
1. Y. Nakamura, A. Harada, T. Gotoh, N. Yokouchi, and T. Iida
"Effect of Silane Chain Length on The Mechanical Properties of Silane-Treated Glass Beads-Filled PVC"
Composite Interfaces 14(2), 117-130 (2007)
   
06 13. S. Fujii, A. J. Ryan, S. P. Armes
"Long-range structural order, moiré pattern and iridescence in latex-stabilized foam"
Journal of the American Chemical Society 128, 7882-7886 (2006)
12. S. Fujii, S. P. Armes, R. Jeans, R. Devonshire, S. Warren, S. L. McArthur, M. J. Burchell, F. Postberg, R. Srama
"Synthesis and characterization of polypyrrole-coated sulfur-rich latex particles: new synthetic mimics for sulfur-based micrometeorites"
Chemistry of Materials 18, 2758-2765 (2006)
11. S. Fujii, S. P. Armes, B. P. Binks, R. Murakami
"Stimulus-responsive particulate emulsifier based on lightly-crosslinked poly(4-vinylpyridine)-silica nanocompositemicrogel particles"
Langmuir 22, 6818-6825 (2006)
10. S. Fujii, P. D. Iddon, A. J. Ryan, S. P. Armes
"Highly stable aqueous foams stabilized solely with polymer latex particles"
Langmuir 22, 7512-7520 (2006)
[Selected as one of most-accessed articles in Langmuir: July-September, 2006]
9. B. P. Binks, R. Murakami, S. P. Armes, S. Fujii
"Effects of pH and salt concentration on oil-in-water emulsions stabilized by nanocomposite particles alone"
Langmuir 22, 2050-2057 (2006)
8. D. Dupin, S. Fujii, S. P. Armes, P. Reeve, Baxter, S. M.
"Efficient synthesis of sterically-stabilized pH-responsive microgels of controllable particle diameter by emulsion polymerization"
Langmuir 22, 3381-3387 (2006)
7. A. Schmid, S. Fujii, S. P. Armes,
"Polystyrene-silica nanocomposite particles via alcoholic dispersion polymerization using a cationic azo initiator"
Langmuir 22, 4923-4927 (2006)
6. Y. Nakamura, T. Usa, T. Gotoh, N. Yokouchi, T. Iida, and K. Nagata
"AFM Observations of Silane Coupling Agent Layers Having a Vinyl Group Deposited on a Mica Surface"
J. Adhesion Sci. Technol. 20(11), 1199-1213 (2006)
5. 中村吉伸,藤田和也,足立 学,橘 祐太,飯田健郎,浦濱圭彬
"碁盤目テープはく離試験の粘着テープに関する因子の再検討"
日本接着学会誌 42(4), 138-145 (2006)
4. H. Hirano, T. Okada, Y. Nakamura, J. Kadota, S. Watase, and K. Hasegawa
"Enhancement of Epoxy Resin/Copper Heterojunction by Introduction of Sulfer-Containing Polymers"
Macromolecular Materials and Engineering 291, 205-209 (2006)
3. 中村吉伸,足立 学,藤田和也,橘 祐太,飯田健郎,浦濱圭彬
"碁盤目テープはく離試験の再検討"
鉄と鋼  92(11), 676-682 (2006)
2. 中村吉伸,五島卓海,宇佐智治,原田篤史,竹内一眞,飯田健郎,永田員也
"種々の有機官能基を有するシランカップリング剤で処理したマイカ表面のAFMによる観察"
ネットワークポリマー  27(4), 202-209 (2006)
1. H. Hirano, T. Okada, Y. Taniguchi, Y. Nakamura, J. Kadota, and K. Hasegawa
"Enhancement of Adhesion and Toughness of Epoxy Resin by Sulfur-Containing Polymers"
ネットワークポリマー  27(4), 186-195 (2006)